Vacuum Tray Dryer -VTD,VTP Vacuum Tray Dryer Machine & Equipment

Manufacture and Design of Vacuum Tray Dryer

Vacuum Tray Dryer is used mainly for drying of high grade,temperature and Oxygen sensitive products.It is the most commonly used batch dryer.It is highly suitable for drying hygroscopic substances, which are dried to very low residual moisture content level.

Vacuum tray dryer is wide used in intermediate pharmaceutical products,chemical,foodstuff and electronic industries.It is optionally available for Hot water system(Steam heated)with tank(insulated,SS304 Steam Radiator/Electrical heaters, circulation pump with FLP Motor and controls.

It is useful for processing of packaged food,Sterilization of Spices,Raw materials,petrochemicals,chemical specialties,chemicals, recycling, different type of sludge, molding friction and fiber compounds,Dyestuff,Plastics(fiber polymers), vacuum tray dryer for pharma, API Powders, Granular, and Flakes product Applications Powders,Non-Free Flowing,Ground coffee,Fertilizer,Flour Mixes,Soup Base,Cake Mix,Powders, Free flowing Drink Mixes,Coffee Beans,Potato Flakes,Whole Spices,Granular Sugar,Grass seed

What are the specifications?

  • Main Body Crafted from 3 trays to 96 Vacuum Tray dryer cGMP Models
  • Steam Radiator/Electrical heaters SS304

What are the features?

  • Total cGMP finish construction
  • All contact part are made out of Stainless Steel 204/SS316/SS316L Material in cGMP models.
  • Hollow pad type heating shelves which are easily removable for maintenance
  • Condenser and condensate receiver fixed on the dryer body or stand alone for remote installation
  • Full welded skirt on vacuum dryer body for flush mounting through the wall
  • Validation ports and nitrogen purge nozzles
  • Heavy Duty Design to with stand Full Vacuum
  • Can be designed to customers specification requirements
  • Digital Temperature indicator(FLP)at H.W.Inlet& Outlet

What are the optional accessories?

  • Condenser and receiver are made in SS 316
  • 50 mm thick glass wool insulation on the vacuum chamber outer surface except door
  • Hot water system(Steam heated) with MS tank(Insulated), SS304 steam Radiator/Electrical heaters,Circulation pump with FLP Motor and Controls.
  • Option for advance PLC Controls with HMI touch screen
  • Option for Flame Proof Electrical
  • Option for lump breaker
  • Option for condenser,Receiver &Cyclone for solvent recovery
  • Option for heating media steam/hot water /hot oil

What are safety Features?

  • Temperature Controls
  • Process controls
  • Vacuum relief valve
  • Over load protection
  • Emergency stop

Salient Features

  • Main Body/Vacuum chamber thick SS 316 plate with heavy duty SS 316 flange and stiffeners.
  • Door thick SS 316 plate (hemisphere shape) with heavy duty SS 316 flange.
  • Shelves Hollow type pads with SS 316 Sheet and Baffles.
  • Condenser (shell and tube) and Receiver SS 304 with Isolation valve and Flow glass in between to monitor condensation.
  • Trays (with out back folding ) in SS 316 rounded corners and edges.
  • Explosion Vent/ Rupture Disc on vacuum chamber
  • Digital Temperature controller (FLP) with solenoid controlled Pneumatic operated valve at Hot water inlet.
  • Provision for Validation Port on Body.
  • Digital Temp. , Indicator (FLP) at H.W. inlet & outlet.
  • Digital type Vacuum gauge and Digital Temperature Indicator (FLP) in vapor line.
  • Pressure release valve in steam line.
  • View Glass/ Light glass provided on vacuum chamber Dorr, Body and Receiver.
  • Silicon Transparent gasket for door.
  • Nitrogen purging valve provided on Vacuum chamber.
  • Vacuum break valve provided on vacuum, chamber.
  • Drain valve for Vacuum chamber and Receiver.
  • Temperature Accuracy plus minus 2 to 3 degree
  • Finish; Internal 320 grit Mirror Polish and outer 180 grit mat finish.

Optionals :

  • Condenser and Receiver in SS 316 instead of SS 304
  • Insulation on the vacuum chamber outer surface except door. The insulation is enclosed and covered with removable SS 304 panels.
  • Skirting /wall panel all along the body/vacuum chamber flange.
  • Validation port with Censors.
  • Hot water system ( steam heated) with MS tank ( Insulated), SS 304 steam radiator/electrical heaters, circulation pump with FLP Motors and controls.
  • Vacuum Pump ( 2stage water ring) with FLP motor.

 

 

Vacuum Tray Dryer 

TECHNICAL SPECIFICATION OF VACUUM TRAY DRYER

  • Main Body / Vacuum chamber are SS 316 plate with heavy duty SS 316 flange and stiffeners.
  • SS 316 Door with heavy duty SS 316 Flange.
  • Shelves Hollow type pads with SS 316 Sheet and Baffles.
  • Condenser (Shell and tub) and Receiver SS 316 with Isolation valve and Flow glass in between to monitor condensation.
  • Trays in SS 316 rounded corners and edges.
  • Digital Temperature controller (FLP) with solenoid controlled Pneumatic operated valve at Hot water inlet. (Optional).
  • Provision for Validation Port on Body.
  • Digital Temp., Indicator (FLP) at H.W. inlet 81. outlet. (Optional).
  • Digital type Vacuum gauge and Digital Temperature Indicator (FLP) in vapor line (Optional)
  • Pressure release valve in steam line.
  • View Glass / Light glass provided on vacuum chamber Door, Body and Receiver.
  • Silicon food grade gasket for door.
  • Nitrogen purging valve provided on Vacuum chamber.
  • Vacuum break valve provided on vacuum, chamber.
  • Drain valve for Vacuum chamber and Receiver.
  • Temperature Accuracy ± 2 to 3 degree.
  • Finish Internal 240 grit Mirror Polish and outer 180 grit matt finish.

Optionals:

  • Condenser and Receiver in SS 316.
  • Insulation on the vacuum chamber outer surface except door. The insulation is enclosed and covered with SS 304 2mm thick sheet.
  • Skirting / Wall panel all along the body / vacuum chamber flange.
  • Hot Water system (steam heated) with MS Tank (Insulated), SS 304 steam radiator/ electrical heaters, circulation pump with FLP Motors and Control.
  • Vacuum Pump (2 Stage water ring) with FLP Motor.

Available model of vacuum tray dryer

Model VTD-03 VTD-06 VTD-12 VTD-24 VTD-36 VTD-48 VTD-96
No of tray 3 6 12 24 36 48 96
Capacity in kg. 3-5 kg 22-25 kg 50-55 kg 90-95 kg 140-145 kg 190-195 kg 380 -385 kg
Tray size: LWH in mm 400x400x32 600x600x32 800x400x32 800x400x32 800x400x32 800x400x32 800x400x32
Tray volume in ltrs 5 11 10 10 10 10 10
No of heating shelves 4 7 7 13 13 17 17
Shelves size in mm 450x450x22 625x625x22 900x825x28 900x900x28 1250x830x28 1250x830x28 1650x1250x28
Distance between shelves in mm 100 100 100 100 100 100 100
Trays on each shelves 1 1 2 2 3 3 6
Condenser 0.2 m2 0.5 m2 1 m2 2 m2 2.5 m2 4 m2 8 m2
Receiver 10 ltrs 25 ltrs 50 ltrs 50 ltrs 75 ltrs 100 ltrs 150 ltrs
H.W. Distribution pipe 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” 2
Door gasket (silicon food grade) 12/ 16 mm T type 12/ 16 mm T type 12/ 16 mm T type 12/ 16 mm T type 12/ 16 mm T type 12/ 16 mm T type 12/ 16 mm T type